DeltaV DO 24 V DC High Side CHARM

Back To Top

PDP_CHARM_DI_v1

A high-side digital output Characterization Module (CHARM) for 24 V DC Solenoid coils.

DeltaV™ DO 24 V DC High Side CHARM

Specs

Device Type

24 V DC Solenoid coils

On State Output rating

100 mA continuous @ 24 V DC

Off-state Leakage Current

1 mA maximum

Line Fault Detection

Guaranteed short circuit: <50 Ω Load, Guaranteed good status: 240 Ω to 10 kΩ load, Guaranteed open circuit: >20 kΩ load

Configurable Output Behavior

Momentary Output, Continuous Pulse Output, Line fault testing

Line Fault Test Timing

200 µsec

Field Circuit Protection

200 mA Current Limiting Circuit, Field wiring disconnect

CHARM power req.

116 mA max @ 24 V DC - Standard Terminal Block, 24 mA max @ 24 V DC - Relay Output Terminal Block

CHARM Heat Dissipation

Pulse Count - Pulse train 0.1 Hz to 10 KHz, 50 µsec min pulse width

Features

Eliminate marshalling and add I/O anywhere in the plant without affecting control room cabinets
No marshalling cabinet or cross-wiring, fewer wires, much less work and fewer contact points for potential failures
No marshalling cabinet or cross-wiring, fewer wires, much less work and fewer contact points for potential failures